Categories

Anti-theft alarm wiring for GSM

Anti-theft alarm wiring for GSM
Anti-theft alarm wiring for GSM Anti-theft alarm wiring for GSM
Product Code: LA31
Weight: 2.50 Kg
Reward Points:
Availability: In Stock
Price: 341.52€
Ex Tax: 282.25€
   - OR -   
Translated by Google
Alarm connected GSM mobile telephone designed to protect electrical systems, wiring, power lines, units PROCESSING any device that works on electricity and capable of being stolen. This is an alarm protected metal housing resistant to moisture, which allows the notice to the phones configured, in case of attempted theft or tampering of the alarm. Detection has cut the electricity supply for each of the 4 lines (3 phases and ground) and detection of vibration or movement of the installation. In addition, the internal tamper arlarma has, so if you try handling it, also sends an alarm signal via GSM.

Specs
  • Alarm to protect electrical equipment connected by GSM.
  • Loss detection voltage 3-phase line and for each separate phase.
  • It has 4 inputs (4 areas) for connecting 4 lines wired sensors (volumetric, magnetic, temperature, external vibration sensors, etc.)..
  • Detection of movement and vibration. The alarm is attached to the equipment to be protected. By moving the team moves the alarm is activated and this.
  • Opening or tampering detection alarm. The alarm is mounted in a watertight compartment cash. If you open and connected the alarm is activated.
  • Allows up to 5 phones to be sent an SMS alert if the alarm is activated.
  • Allows up to 5 phones to which Voice will be called if the alarm is activated.
  • Connecting to external siren (not included).
  • Micro Connects external environment (not included). If you install the micro environment, it is possible to connect to the alarm to hear the sound.
  • The programacióny monitoring the status of the alarm is done via the reception envíoy GSM SMS messages. You can perform the assembly, disassembly, scheduling, check the status of the alarm, etc..
  • Ability to automate daily communication with the alarm for status, verify proper operation and guarantee the electricity supply.
  • Alumuminio housing, resistant to moisture (IP55 protection), fire, the corrosiónya shock. Ideal for installation on the outside.
  • Resists electromagnetic interference (IEC55022).
  • It has battery backup of 3.7 VDC 1200 mAh ensures operation of the alarm even if power cut.
  • The alarm is activated if you cut the power for more than 2 seconds.
  • Operates in the GSM 900 MHz and 1800 MHz.
  • Operating voltage: 220 VAC (270 VAC maximum and minimum of 110 VAC).
  • Size: 220 x 150 x 105 mm.


Product Documentation

Write a review

Your Name:


Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Copyright © hdi2 - Hogar Digital e Inmótica Ingenieros, S.L.
Hiper Shops.com