Categories

CCTV video tester (NT120)

CCTV video tester (NT120)
CCTV video tester (NT120) CCTV video tester (NT120) CCTV video tester (NT120) CCTV video tester (NT120) CCTV video tester (NT120) CCTV video tester (NT120) CCTV video tester (NT120)
Product Code: VV94
Weight: 0.80 Kg
Reward Points:
Availability: In Stock
Price: 295.54€
Ex Tax: 244.25€
   - OR -   
Translated by Google
Portable tester facilities and equipment related to CCTV (Closed Circuit Television). This is a portable device with an LCD screen of 2.8 "which allows checking of equipment CCTV tester configuration, the display of images from video cameras, PTZ control signals (Pan, tilt and zoom), image generation, data capture control Serial RS485 and testing LAN cable. This facilitates the work of installation and technical maintenance of CCTV.

Specs
  • Color video display size 2.8 "960 x 240 resolution.
  • PTZ Control. Scrolls up and down (tilt), left and right (pan) and adjusting the zoom.
  • Automatic adjustment to the standard NTSC or PAL video.
  • Adjusting LCD brightness settings, contrast and color saturation.
  • Pattern generation video PAL and NTSC. Generation of up to 7 letters of verification of multi-color bar.
  • RS485 data analysis that allow technicians to locate faults in the CCTV system.
  • Function testing and identification of the LAN cable.
  • Multi-interface: supports RS232, RS422 and RS485.
  • Multi-baud: supports speeds of 150, 300, 600, 1200, 2400, 4800, 9600 and 19200 bps.
  • Multi-protocol: Supports up to 20 PTZ control protocols, highlighting the most popular and PELCO-P, PELCO-D, Samsung, etc.
  • Tracking PTZ address for locating the identifier (ID) of the camera.
  • Li-Ion 1400 mAh 3.7 VDC. It incorporates an advanced power control and protection. Allows up to 5 hours operation with a loading time of 5 hours.
  • They provide the necessary cables, power supply and CCTV equipment tester.
Connections and controls
  • Two female BNC connectors for video input and output.
  • For terminal connection (2-pin) for the RS485 signal.
  • DB9 male for RS232 signal.
  • RJ45 female connector for testing network cables UTP. Remote terminator is supplied with a RJ45 female connector.
  • Switch ON / OFF.
  • DC Input Connector 9 VDC jack for charging the device.


Product Documentation

Write a review

Your Name:


Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Copyright © hdi2 - Hogar Digital e Inmótica Ingenieros, S.L.
Hiper Shops.com