Categories

Power Over Ethernet Kit (PoE injector + splitter)

Power Over Ethernet Kit (PoE injector + splitter)
Power Over Ethernet Kit (PoE injector + splitter) Power Over Ethernet Kit (PoE injector + splitter) Power Over Ethernet Kit (PoE injector + splitter) Power Over Ethernet Kit (PoE injector + splitter) Power Over Ethernet Kit (PoE injector + splitter) Power Over Ethernet Kit (PoE injector + splitter) Power Over Ethernet Kit (PoE injector + splitter)
Product Code: RA51
Weight: 0.50 Kg
Reward Points:
Availability: In Stock
Price: 56.48€
Ex Tax: 46.68€
   - OR -   
Translated by Google
Kit consists of two modules of small size: the injector and the splitter. The DC INJECTOR inserted in the UTP cable without affecting the operation of the data transmission network itself, using free wires (pin 4, 5, 7 and 8). Along with the injector is supplied with a 15VDC power source used to inject the current. Batch power input has input, RJ45 (LAN) and output RJ45 (LAN + DC). The splitter (or splitter) is again separate the data and the DC (LAN + DC) that will feed the device. The maximum distance between these two devices is 100m, which is defined by the IEEE 802.3 standard itself. Allows 3 different voltages: 5V/2A, 12V/1A 7.5V/1.5A and, to fit most devices, selectable by switch located in the splitter. Works with cable TIA/EIA-568, Cat.5/5e, 4-pair 10Base-T or 100Base-TX. SPLITTER module has a separate entrance for both RJ45 (LAN + DC), power output (DC) and output RJ45 (LAN). Along with the supplied SPLITTER 3 power cables with different diameters 15cm DC connector, and a 15cm hose Cat.5e. Size 64x42x21mm modules.

Write a review

Your Name:


Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Copyright © hdi2 - Hogar Digital e Inmótica Ingenieros, S.L.
Hiper Shops.com