Categories

Thread for basic remote control bulb (E27 kit 1 and 1 switch)

Thread for basic remote control bulb (E27 kit 1 and 1 switch)
Product Code: DO43
Weight: 0.18 Kg
Reward Points:
Availability: In Stock
Price: 22.65€
Ex Tax: 18.72€
   - OR -   
Translated by Google
Control system on and off bulbs via remote control. It is a system that consists of a or more receivers (sockets, switches and sockets) and one or multiple remotes. The lamp holder (receivers) of this allowed range simply the function on and off. It is about lamp holder E27 screw for remote control of lights. The remote control This series allows for on and off 6 lines of receivers. Each line receivers have the same code on a line may have one or more sockets with the same code, which turn on and off simultaneously to the same order on the remote control.

Specs
  • Kit includes a lamp holder (receiver) and an E27 thread remote control wall switch as.
  • Compatible with remote controls and # # DO53 DO54.
  • Compatible with kits # DO42 DO41 and #.
  • It can be combined with other recipients of the range and # # DO0x DO3x.
Lamp holders Specifications
  • Automatic programming code. Allows up to 6 codes (up 6 lines of lamp holder).
  • Size of the junction box or receiver: 10 mm (height) x 55 mm (Diameter).
  • E27 has female threads where you screw the bulb and E27 male screw to be installed on the original lamp holder.
  • It has push button ON / OFF control from within the lamp holder, without the remote control.
  • LED that indicates the condition of the lamp.
  • Voltage: 230 VAC, 50 Hz.
  • Maximum load: 60 W (0.5 A).
  • Wireless transmission frequency: 433.92 MHz.
  • Allows communication to more than 20 m (up to 30 m in some environments).
  • Low power consumption (<0.2 W) in ON. In short OFF mode current automatically for greater energy savings.
  • The receiver requires no battery because it feeds on the network itself electrical.
    Switch specifications distance
    • Remote control box-shaped wall 80 x 80 mm allows control of a single line of plugs (one code).
    • The installation requires no wall switch available a wall box. Just enough to set the switch (not accurate background) on a flat wall.
    • Has a single button that controls a single channel (channel 1).
    • Ideal for quick installations without works. The system races in the wall anti.
    • Works with a stack of 12 VDC (23 A) as our reference # EN60 (including a battery).


    Product Documentation

    Write a review

    Your Name:


    Review: Note: HTML is not translated!

    Rating: Bad            Good

    Enter the code in the box below:



    Copyright © hdi2 - Hogar Digital e Inmótica Ingenieros, S.L.
    Hiper Shops.com